OpenSimulator · EN

Browse INI sections

Dedicated section search, alphabetical index and detailed settings from the catalog.

This index only includes entries with an explicit INI-file reference in the catalog. Optional modules and example templates may still appear: always verify the source file before adding settings.

← Back to all sections

[BulletSim] (27 settings)

BulletSim physics engine parameters: tune with collision and load tests.

27 settings

AvatarHeightHighFudge float

Catalog value : 0

Technical description (original English : Avatar physics height adjustments. http://opensimulator.org/wiki/BulletSim#Adjusting_Avatar_Height

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:648

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarHeightLowFudge float

Catalog value : 0

Technical description (original English : Avatar physics height adjustments. http://opensimulator.org/wiki/BulletSim#Adjusting_Avatar_Height

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:644

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarHeightMidFudge float

Catalog value : 0

Technical description (original English : Avatar physics height adjustments. http://opensimulator.org/wiki/BulletSim#Adjusting_Avatar_Height

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:646

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarStepAngle float

Catalog value : 0.3

Technical description (original English : Avatar walk-up-stairs parameters If an avatar collides with an object 'close to its feet', the avatar will be moved/pushed up do simulate stepping up.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:672

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarStepApproachFactor float

Catalog value : 2

Technical description (original English : Avatar walk-up-stairs parameters If an avatar collides with an object 'close to its feet', the avatar will be moved/pushed up do simulate stepping up.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:676

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarStepForceFactor float

Catalog value : 0

Technical description (original English : Avatar walk-up-stairs parameters If an avatar collides with an object 'close to its feet', the avatar will be moved/pushed up do simulate stepping up.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:678

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarStepGroundFudge float

Catalog value : 0.1

Technical description (original English : Avatar walk-up-stairs parameters If an avatar collides with an object 'close to its feet', the avatar will be moved/pushed up do simulate stepping up.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:674

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarStepHeight float

Catalog value : code: 0.999 / ini: 0.6

Technical description (original English : Avatar walk-up-stairs parameters If an avatar collides with an object 'close to its feet', the avatar will be moved/pushed up do simulate stepping up.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:670

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarStepSmoothingSteps int

Catalog value : 1

Technical description (original English : Avatar walk-up-stairs parameters If an avatar collides with an object 'close to its feet', the avatar will be moved/pushed up do simulate stepping up.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:682

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarStepUpCorrectionFactor float

Catalog value : 0.8

Technical description (original English : Avatar walk-up-stairs parameters If an avatar collides with an object 'close to its feet', the avatar will be moved/pushed up do simulate stepping up.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:680

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarTerminalVelocity float

Catalog value : code: -54.0 / ini: -54

Technical description (original English : Terminal velocity of a falling avatar This is the same http://en.wikipedia.org/wiki/Terminal_velocity#Examples negative for a downward speed.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:656

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarToAvatarCollisionsByDefault bool

Catalog value : true

Technical description (original English : Should avatars collide with each other?

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:619

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

BulletEngine string

Catalog value : BulletUnmanaged

Technical description (original English : There are two bullet physics libraries, bulletunmanaged is the default and is a native c++ dll bulletxna is a managed C# dll. They have comparible functionality but the c++ one is much faster.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSScene.cs:386

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ForceSimplePrimMeshing bool

Catalog value : false

Technical description (original English : If 'true', force simple prims (box and sphere) to be meshed If 'false', the Bullet native special case shape is used for square rectangles and even dimensioned spheres.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:440

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LinkImplementation

Catalog value : 1

Technical description (original English : Default linkset implmentation 'Constraint' uses physics constraints to hold linkset together. 'Compound' builds a compound shape from the children shapes to create a single physical shape. 'Compound' uses a lot less CPU time. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LinksetOffsetCenterOfMass bool

Catalog value : code: true / ini: false

Technical description (original English : If 'true', offset a linkset's origin based on mass of linkset parts.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:833

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MaxCollisionsPerFrame int

Catalog value : 2048

Technical description (original English : If there are thousands of physical objects, these maximums should be increased.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:497

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MaxUpdatesPerFrame int

Catalog value : code: 8000 / ini: 8192

Technical description (original English : If there are thousands of physical objects, these maximums should be increased.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:501

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MeshSculptedPrim bool

Catalog value : true

Technical description (original English : If 'true', turn scuplties into meshes

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:436

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

PhysicsLoggingDir string

Catalog value : .

Technical description (original English : Detailed physics debug logging. Very verbose.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSScene.cs:391

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

PhysicsLoggingEnabled bool

Catalog value : false

Technical description (original English : Detailed physics debug logging. Very verbose.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSScene.cs:390

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ShouldRemoveZeroWidthTriangles bool

Catalog value : true

Technical description (original English : If 'true', when creating meshes, remove all triangles that have two equal vertexes. Happens often in sculpties. If turned off, there will be some doorways that cannot be walked through.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:448

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ShouldUseAssetHulls bool

Catalog value : true

Technical description (original English : If 'true', use convex hull definition in mesh asset if present.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:456

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

TerrainImplementation float

Catalog value : ini: 0 (code: (float)BSTerrainPhys.TerrainImplementation.Heightmap)

Technical description (original English : Terrain implementation can use either Bullet's heightField or BulletSim can build a mesh. 0=heightField, 1=mesh

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:602

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

TerrainMeshMagnification int

Catalog value : 2

Technical description (original English : For mesh terrain, the detail of the created mesh. '1' gives 256x256 (heightfield resolution). '2' gives 512x512. Etc. Cannot be larger than '4'. Higher magnifications use lots of memory.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:604

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UseSeparatePhysicsThread bool

Catalog value : false

Technical description (original English : BulletSim can run on its own thread independent of the simulator's heartbeat thread. Enabling this will not let the physics engine slow down avatar movement, etc.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSParam.cs:431

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

VehicleLoggingEnabled bool

Catalog value : false

Technical description (original English : Detailed physics debug logging. Very verbose.

Source code : OpenSim/Region/PhysicsModules/BulletS/BSScene.cs:397

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.