OpenSimulator · EN

Browse INI sections

Dedicated section search, alphabetical index and detailed settings from the catalog.

This index only includes entries with an explicit INI-file reference in the catalog. Optional modules and example templates may still appear: always verify the source file before adding settings.

← Back to all sections

[ClientStack.LindenCaps] (70 settings)

The settings below are listed in the catalog. Availability depends on OpenSimulator version and installed modules.

70 settings

Cap_AttachmentResources string

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCapsModule.cs:147

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_AvatarPickerSearch string

Catalog value : code: "" / ini: localhost

Technical description (original English : Capability for searching for people [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/AvatarPickerSearchModule.cs:65

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ChatSessionRequest

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_CopyInventoryFromNotecard

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_DispatchRegionInfo

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_EnvironmentSettings string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/CoreModules/World/LightShare/EnvironmentModule.cs:88

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_EstateAccess string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/EstateAccess.cs:67

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_EstateChangeInfo string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/EstateChangeInfo.cs:64

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_EventQueueGet

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_FetchInventory

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_FetchInventory2 string

Catalog value : code: "" / ini: localhost

Technical description (original English : Capabilities for fetching inventory over HTTP rather than UDP FetchInventoryDescendents2 and FetchInventory2 are the ones used in the latest Linden Lab viewers (from some point in the v2 series and above) It appears that Linden Lab viewer 3.3.1 onwards will not work properly if FetchInventoryDescendents2 and FetchInventory2 are not enabled [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/FetchInventory2Module.cs:71

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_FetchInventoryDescendents2 string

Catalog value : code: "" / ini: localhost

Technical description (original English : Capabilities for fetching inventory over HTTP rather than UDP FetchInventoryDescendents2 and FetchInventory2 are the ones used in the latest Linden Lab viewers (from some point in the v2 series and above) It appears that Linden Lab viewer 3.3.1 onwards will not work properly if FetchInventoryDescendents2 and FetchInventory2 are not enabled [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/WebFetchInvDescModule.cs:119

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_FetchLib

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_FetchLib2 string

Catalog value : localhost

Technical description (original English : Capabilities for fetching inventory over HTTP rather than UDP FetchInventoryDescendents2 and FetchInventory2 are the ones used in the latest Linden Lab viewers (from some point in the v2 series and above) It appears that Linden Lab viewer 3.3.1 onwards will not work properly if FetchInventoryDescendents2 and FetchInventory2 are not enabled [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/FetchInventory2Module.cs:72

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_FetchLibDescendents

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_FetchLibDescendents2 string

Catalog value : code: "" / ini: localhost

Technical description (original English : Capabilities for fetching inventory over HTTP rather than UDP FetchInventoryDescendents2 and FetchInventory2 are the ones used in the latest Linden Lab viewers (from some point in the v2 series and above) It appears that Linden Lab viewer 3.3.1 onwards will not work properly if FetchInventoryDescendents2 and FetchInventory2 are not enabled [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/FetchLibDescModule.cs:108

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GetAsset string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/GetAssetsModule.cs:110

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GetDisplayNames

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GetMesh string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/GetAssetsModule.cs:102

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GetMesh2 string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/GetAssetsModule.cs:106

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GetObjectCost

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GetObjectPhysicsData

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GetTexture string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/GetAssetsModule.cs:98

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GroupMemberData string

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCapsModule.cs:141

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_GroupProposalBallot

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_HomeLocation string

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCapsModule.cs:138

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_LandResources string

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/BunchOfCaps/BunchOfCapsModule.cs:144

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_MapLayer

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_MapLayerGod

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_NewFileAgentInventory

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_NewFileAgentInventoryVariablePrice

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ObjectAdd

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ObjectMedia

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ObjectMediaNavigate

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ParcelMediaURLFilterList

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ParcelNavigateMedia

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ParcelPropertiesUpdate

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ParcelVoiceInfoRequest

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ProductInfoRequest

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ProvisionVoiceAccountRequest

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_RemoteParcelRequest

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_RequestTextureDownload

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SearchStatRequest

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SearchStatTracking

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SendPostcard

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SendUserReport

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SendUserReportWithScreenshot

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ServerReleaseNotes string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/ServerReleaseNotesModule.cs:69

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SetDisplayName

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SimConsole

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_SimulatorFeatures

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_StartGroupProposal

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_TextureStats

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UntrustedSimulatorMessage

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateAgentInformation

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateAgentLanguage

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateGestureAgentInventory

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateGestureTaskInventory

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateNotecardAgentInventory

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateNotecardTaskInventory

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateScriptAgent

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UpdateScriptTask

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UploadBakedTexture string

Catalog value : code: "" / ini: localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code : OpenSim/Region/ClientStack/Linden/Caps/UploadBakedTextureModule.cs:61

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_UploadObjectAsset

Catalog value : localhost

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ViewerStartAuction

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_ViewerStats

Catalog value :

Technical description (original English : Long list of capabilities taken from http://wiki.secondlife.com/wiki/Current_Sim_Capabilities Not all are supported by OpenSim. The ones supported are set to localhost. These defaults can be overwritten in OpenSim.ini [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

Cap_WebFetchInventoryDescendents

Catalog value :

Technical description (original English : Capabilities for fetching inventory over HTTP rather than UDP FetchInventoryDescendents2 and FetchInventory2 are the ones used in the latest Linden Lab viewers (from some point in the v2 series and above) It appears that Linden Lab viewer 3.3.1 onwards will not work properly if FetchInventoryDescendents2 and FetchInventory2 are not enabled [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete). Read dynamically as "Cap_" + capability name; value is "" (disabled), "localhost" or a URL.]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

default

Catalog value :

Technical description (original English : TextureSendLimit determines how many packets will be put on the lludp outgoing queue each cycle. Like the settings above, this is a balance between responsiveness to priority updates and total throughput. Higher numbers will give a better throughput at the cost of reduced responsiveness to client priority changes or transfer aborts [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Template / example / test

Referenced files:

  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

SupportViewerObjectsCache

Catalog value :

Technical description (original English : No documentation in INI comments. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Template / example / test

Referenced files:

  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

TextureSendLimit

Catalog value :

Technical description (original English : TextureSendLimit determines how many packets will be put on the lludp outgoing queue each cycle. Like the settings above, this is a balance between responsiveness to priority updates and total throughput. Higher numbers will give a better throughput at the cost of reduced responsiveness to client priority changes or transfer aborts [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Template / example / test

Referenced files:

  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.