OpenSimulator · EN

Browse INI sections

Dedicated section search, alphabetical index and detailed settings from the catalog.

This index only includes entries with an explicit INI-file reference in the catalog. Optional modules and example templates may still appear: always verify the source file before adding settings.

← Back to all sections

[LL-Functions] (53 settings)

The settings below are listed in the catalog. Availability depends on OpenSimulator version and installed modules.

53 settings

AddStatsInGetBoundingBox bool

Catalog value : false

Technical description (original English : Add a third vector with stats when returning results from llGetBoundingBox. Lists objects (groups), prims/meshes/avatars (parts) and vertices rendered.

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:472

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AllowGodFunctions

Catalog value : false

Technical description (original English : Are god functions such as llSetObjectPermMask() allowed? If true then gods and only gods have access to these functions. If false then gods cannot execute these functions either. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AllowosConsoleCommand

Catalog value : false

Technical description (original English : Set the following to true to allow administrator owned scripts to execute console commands currently unused [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvailableTimeInMsPerAvatarInLlCastRay int

Catalog value : 10

Technical description (original English : Available time in ms for llCastRay per throttle period and avatar when script in attachment or vehicle in llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:513

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvailableTimeInMsPerRegionInLlCastRay int

Catalog value : 40

Technical description (original English : Available time in ms for llCastRay per throttle period and 65536 m2 land area in llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:512

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AvatarDetailLevelInLlCastRay int

Catalog value : ini: 1 (code: (int)m_avatarLodInCastRay)

Technical description (original English : Detail level when rendering avatar capsules in llCastRay V3 0 = Low, 1 = Medium, 2 = High, 3 = Highest, higer level gives better accuracy but slower call

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:505

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

DetectExitHitsInLlCastRay bool

Catalog value : false

Technical description (original English : Report ray intersections with surfaces on exits from a prim as hits in llCastRay V3 if true

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:509

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

DoAttachmentsInLlCastRay bool

Catalog value : false

Technical description (original English : Detect attachments in llCastRay V3 if true

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:510

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

FloatTolerance2InLlCastRay float

Catalog value : 0.001

Technical description (original English : Accepted distance difference between duplicate hits in llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:501

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

FloatToleranceInLlCastRay float

Catalog value : 0.00001

Technical description (original English : Accepted calculation precision error in calculations in llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:500

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxGroundsittingXconst float

Catalog value : -0.3875

Technical description (original English : Avatar bounding box, lower X value, constant part, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:481

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxGroundsittingYconst float

Catalog value : -0.5

Technical description (original English : Avatar bounding box, lower Y value, constant part, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:483

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxGroundsittingZcoeff float

Catalog value : -0.375

Technical description (original English : Avatar bounding box, lower Z value, coefficient to multiply with avatar height, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:486

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxGroundsittingZconst float

Catalog value : -0.05

Technical description (original English : Avatar bounding box, lower Z value, constant part, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:485

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxSittingXconst float

Catalog value : -0.5875

Technical description (original English : Avatar bounding box, lower X value, constant part, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:489

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxSittingYconst float

Catalog value : -0.35

Technical description (original English : Avatar bounding box, lower Y value, constant part, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:491

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxSittingZcoeff float

Catalog value : -0.375

Technical description (original English : Avatar bounding box, lower Z value, coefficient to multiply with avatar height, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:494

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxSittingZconst float

Catalog value : -0.35

Technical description (original English : Avatar bounding box, lower Z value, constant part, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:493

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxStandingXconst float

Catalog value : -0.275

Technical description (original English : Avatar bounding box, lower X value, constant part, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:473

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxStandingYconst float

Catalog value : -0.35

Technical description (original English : Avatar bounding box, lower Y value, constant part, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:475

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxStandingZcoeff float

Catalog value : -0.5

Technical description (original English : Avatar bounding box, lower Z value, coefficient to multiply with avatar height, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:478

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

LowerAvatarBoundingBoxStandingZconst float

Catalog value : -0.1

Technical description (original English : Avatar bounding box, lower Z value, constant part, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:477

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

max_external_urls_per_simulator int

Catalog value : code: 15000 / ini: 100

Technical description (original English : Maximum number of external urls that scripts can set up in this simulator (e.g. via llRequestURL())

Source code : OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs:171

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

max_listens_per_region int

Catalog value : 1000

Technical description (original English : Maximum number of llListen events we allow over the entire region. Set this to 0 to have no limit imposed

Source code : OpenSim/Region/CoreModules/Scripting/WorldComm/WorldCommModule.cs:122

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

max_listens_per_script int

Catalog value : code: 65 / ini: 64

Technical description (original English : Maximum number of llListen events we allow per script Set this to 0 to have no limit imposed.

Source code : OpenSim/Region/CoreModules/Scripting/WorldComm/WorldCommModule.cs:123

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MaxHitsInLlCastRay int

Catalog value : 16

Technical description (original English : Maximum number of returned hits from llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:506

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MaxHitsPerObjectInLlCastRay int

Catalog value : 16

Technical description (original English : Maximum number of returned hits per object from llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:508

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MaxHitsPerPrimInLlCastRay int

Catalog value : 16

Technical description (original English : Maximum number of returned hits per prim from llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:507

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MaximumAvailableTimeInMsInLlCastRay int

Catalog value : 40

Technical description (original English : Maximum available time in ms possible in llCastRay V3, not to get too high values with varregions

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:515

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MeshDetailLevelInLlCastRay int

Catalog value : ini: 3 (code: (int)m_meshLodInCastRay)

Technical description (original English : Detail level when rendering meshes in llCastRay V3 0 = Low, 1 = Medium, 2 = High, 3 = Highest, higer level gives better accuracy but slower call

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:504

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

PrimBoundingBoxSafetyCoefficientX float

Catalog value : 2.414214

Technical description (original English : Safety coefficient for max bounding box from prim size box X coordinate Worst case is twisted and sheared box, 1+sqrt(2)

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:497

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

PrimBoundingBoxSafetyCoefficientY float

Catalog value : 2.414214

Technical description (original English : Safety coefficient for max bounding box from prim size box Y coordinate Worst case is twisted and sheared box, 1+sqrt(2)

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:498

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

PrimBoundingBoxSafetyCoefficientZ float

Catalog value : 1.618034

Technical description (original English : Safety coefficient for max bounding box from prim size box Z coordinate Worst case is twisted tube, 0.5+sqrt(1.25)

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:499

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

PrimDetailLevelInLlCastRay int

Catalog value : ini: 1 (code: (int)m_primLodInCastRay)

Technical description (original English : Detail level when rendering prims in llCastRay V3 0 = Low, 1 = Medium, 2 = High, 3 = Highest, higer level gives better accuracy but slower call

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:502

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

RequiredAvailableTimeInMsInLlCastRay int

Catalog value : 2

Technical description (original English : Required available time in ms left to perform a new llCastRay in llCastRay V3

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:514

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

RestrictEmail bool

Catalog value : false

Technical description (original English : Restrict the email address used by llEmail to the address associated with the avatars user account? If true then llEmail will only send email to the address in the user account of the avatar who owns the object containing the script. If false then email may be sent to any valid email address.

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:469

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

SculptDetailLevelInLlCastRay int

Catalog value : ini: 1 (code: (int)m_sculptLodInCastRay)

Technical description (original English : Detail level when rendering sculpts in llCastRay V3 0 = Low, 1 = Medium, 2 = High, 3 = Highest, higer level gives better accuracy but slower call

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:503

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ThrottleTimeInMsInLlCastRay int

Catalog value : 200

Technical description (original English : Throttle period length in ms before which all old llCastRay use is discarded in llCastRay V3 The sum of AvailableTimeInMsPerRegionInLlCastRay and all AvailableTimeInMsPerAvatarInLlCastRay should not exceed this

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:511

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxGroundsittingXconst float

Catalog value : 0.3875

Technical description (original English : Avatar bounding box, upper X value, constant part, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:482

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxGroundsittingYconst float

Catalog value : 0.5

Technical description (original English : Avatar bounding box, upper Y value, constant part, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:484

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxGroundsittingZcoeff float

Catalog value : 0.0

Technical description (original English : Avatar bounding box, upper Z value, coefficient to multiply with avatar height, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:488

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxGroundsittingZconst float

Catalog value : 0.5

Technical description (original English : Avatar bounding box, upper Z value, constant part, when groundsitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:487

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxSittingXconst float

Catalog value : 0.1875

Technical description (original English : Avatar bounding box, upper X value, constant part, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:490

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxSittingYconst float

Catalog value : 0.35

Technical description (original English : Avatar bounding box, upper Y value, constant part, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:492

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxSittingZcoeff float

Catalog value : 0.25

Technical description (original English : Avatar bounding box, upper Z value, coefficient to multiply with avatar height, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:496

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxSittingZconst float

Catalog value : -0.25

Technical description (original English : Avatar bounding box, upper Z value, constant part, when sitting

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:495

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxStandingXconst float

Catalog value : 0.275

Technical description (original English : Avatar bounding box, upper X value, constant part, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:474

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxStandingYconst float

Catalog value : 0.35

Technical description (original English : Avatar bounding box, upper Y value, constant part, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:476

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxStandingZcoeff float

Catalog value : 0.5

Technical description (original English : Avatar bounding box, upper Z value, coefficient to multiply with avatar height, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:480

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UpperAvatarBoundingBoxStandingZconst float

Catalog value : 0.1

Technical description (original English : Avatar bounding box, upper Z value, constant part, when standing

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:479

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UseLlCastRayV3

Catalog value : false

Technical description (original English : Use llCastRay V3 if true. Implements llCastRay similar but not identical to Second Life. See http://wiki.secondlife.com/wiki/LlCastRay . NEW Meshes prims for good accuracy in ray hit detection, handling basic and tortured prims, sculpts and meshes. Uses ellipsoid, correctly sized avatar capsules. Handles complex terrain, multi-prim objects and seated avatars. Implements throttling and the status codes RCERR_UNKNOWN and RCERR_CAST_TIME_EXCEEDED, so LSL scripts need to handle these responses and RCERR_SIM_PERF_LOW. WARNING Can be faster on some servers and scenes, but slower on others, compared to previous version of llCastRay in OpenSimulator. Is in most cases considerably slower than llCastRay in Second Life. Generates geometry meshes and can therefore use much system resources. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UseMeshCacheInLlCastRay bool

Catalog value : true

Technical description (original English : Use cached meshes in llCastRay V3 if true Improves performance but uses more memory

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:516

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

UseSimpleBoxesInGetBoundingBox bool

Catalog value : false

Technical description (original English : Use size boxes instead of meshed prims, sculpts and mesh when calculating bounding boxes. Speeds up calculations but can make them inaccurate, in some cases very inaccurate.

Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:471

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.