OpenSimulator · EN

Browse INI sections

Dedicated section search, alphabetical index and detailed settings from the catalog.

This index only includes entries with an explicit INI-file reference in the catalog. Optional modules and example templates may still appear: always verify the source file before adding settings.

← Back to all sections

[Network] (29 settings)

Simulator network settings: addresses, ports and communication.

29 settings

AllowllHTTPRequestIn bool

Catalog value : false

Technical description (original English : By default, scripts are not allowed to call private services via llHttpRequest() Such calls are detected by the X-SecondLife-Shared HTTP header If you allow such calls you must be sure that they are restricted to very trusted scripters (remember scripts can also be in visiting avatar attachments). This can be overriden in individual private service sections if necessary

Source code : OpenSim/Framework/ServiceAuth/ServiceAuth.cs:45

Template / example / testROBUST

Referenced files:

  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

AuthType string

Catalog value : code: None / ini: BasicHttpAuthentication, None

Technical description (original English : The following 3 variables are for HTTP Basic Authentication for the Robust services. Use this if your central services in port 8003 need to be accessible on the Internet but you want to protect them from unauthorized access. The username and password here need to match the ones in the Robust service configuration. [Also looked up in: Groups, Messaging (later sections override earlier).]

Source code : OpenSim/Addons/Groups/Remote/GroupsServiceRemoteConnector.cs:64 | OpenSim/Addons/OfflineIM/Remote/OfflineIMServiceRemoteConnector.cs:71 | OpenSim/Framework/ServiceAuth/ServiceAuth.cs:50 | OpenSim/Services/Connectors/BaseServiceConnector.cs:22

Template / example / testROBUST

Referenced files:

  • bin/OpenSim.ini.example — Template / example / test
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

cert_pass string

Catalog value : ***

Technical description (original English : Password for cert

Source code : OpenSim/Framework/NetworkServersInfo.cs:77 | OpenSim/Server/Base/HttpServerBase.cs:101 | OpenSim/Server/Base/HttpServerBase.cs:128

Shipped defaultsTemplate / example / testROBUST

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

cert_path string

Catalog value : code: "" / ini: path/to/cert.p12

Technical description (original English : Path to X509 certificate, can be the same as main or another

Source code : OpenSim/Framework/NetworkServersInfo.cs:76 | OpenSim/Server/Base/HttpServerBase.cs:94 | OpenSim/Server/Base/HttpServerBase.cs:122

Shipped defaultsTemplate / example / testROBUST

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

console_port int

Catalog value : 0

Technical description (original English : Port for console connections. Default: 0.

Source code : OpenSim/Region/Application/OpenSim.cs:110

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ConsoleAllowedOrigin string

Catalog value : ""

Technical description (original English : From code: Woefully underdocumented, this is what makes javascript console clients work. Set to "*" for anywhere or (better) to specific addresses.

Source code : OpenSim/Framework/Console/RemoteConsole.cs:175

Template / example / test

Referenced files:

  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ConsolePass string

Catalog value : ***

Technical description (original English : Password for console account.

Source code : OpenSim/Framework/Console/RemoteConsole.cs:170 | addon-modules/21Wifi/WebApp/WebApp.cs:412

Shipped defaultsTemplate / example / testROBUST

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ConsolePort int

Catalog value : 0

Technical description (original English : * The following are for the remote console * They have no effect for the local or basic console types * Leave commented to disable logins to the console

Source code : OpenSim/Server/Base/HttpServerBase.cs:75

Template / example / testROBUST

Referenced files:

  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ConsoleUser string

Catalog value : code: "" / ini: Test

Technical description (original English : User name for console account. Configure the remote console user here. This will not actually be used unless you use -console=rest at startup.

Source code : OpenSim/Framework/Console/RemoteConsole.cs:169 | addon-modules/21Wifi/WebApp/WebApp.cs:411

Shipped defaultsTemplate / example / testROBUST

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

ExternalHostNameForLSL string

Catalog value : code: null / ini: 127.0.0.1, ${Const|BaseHostname}

Technical description (original English : Hostname to use in llRequestURL/llRequestSecureURL must be a valid hostname for the ssl cert. if not defined - llRequestURL/llRequestSecureURL are disabled

Source code : OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs:134

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

http_listener_cert_pass string

Catalog value : ***

Technical description (original English : if the cert doesnt have a oficial CA or is selfsigned viewers option NoVerifySSLCert need to be set true

Source code : OpenSim/Framework/NetworkServersInfo.cs:69

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

http_listener_cert_path string

Catalog value : code: "" / ini: mycert.p12, SSL\ssl\OpenSim.p12

Technical description (original English : if the cert doesnt have a oficial CA or is selfsigned viewers option NoVerifySSLCert need to be set true

Source code : OpenSim/Framework/NetworkServersInfo.cs:68

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

http_listener_cn string

Catalog value : code: localhost / ini: myRegionsExternalHostName

Technical description (original English : currently if using ssl, regions ExternalHostName must the the same and equal to http_listener_cn this will change is future

Source code : OpenSim/Framework/NetworkServersInfo.cs:67

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

http_listener_port int | string

Catalog value : 9000

Technical description (original English : TCP Port for this simulator to listen on? (This must be unique to the simulator!). Default: 9000. Simulator HTTP port. This is not the region port, but the port the entire simulator listens on. This port uses the TCP protocol, while the region ports use UDP.

Source code : OpenSim/Framework/NetworkServersInfo.cs:64 | OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs:138 | OpenSim/Region/OptionalModules/DataSnapshot/DataSnapshotManager.cs:142 | OpenSim/Server/Handlers/Grid/GridInfoHandlers.cs:137

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

http_listener_ssl bool

Catalog value : false

Technical description (original English : ssl config: Experimental!

Source code : OpenSim/Framework/NetworkServersInfo.cs:66

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

http_listener_sslport int

Catalog value : ini: 9001 (code: (int)ConfigSettings.DefaultRegionHttpPort + 1)

Technical description (original English : ssl config: Experimental!

Source code : OpenSim/Framework/NetworkServersInfo.cs:65

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

HttpAuthPassword string

Catalog value : ***

Technical description (original English : The following 3 variables are for HTTP Basic Authentication for the Robust services. Use this if your central services in port 8003 need to be accessible on the Internet but you want to protect them from unauthorized access. The username and password here need to match the ones in the Robust service configuration.

Source code : OpenSim/Framework/ServiceAuth/BasicHttpAuthentication.cs:59

Template / example / testROBUST

Referenced files:

  • bin/OpenSim.ini.example — Template / example / test
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

HttpAuthUsername string

Catalog value : code: "" / ini: some_username

Technical description (original English : The following 3 variables are for HTTP Basic Authentication for the Robust services. Use this if your central services in port 8003 need to be accessible on the Internet but you want to protect them from unauthorized access. The username and password here need to match the ones in the Robust service configuration.

Source code : OpenSim/Framework/ServiceAuth/BasicHttpAuthentication.cs:58

Template / example / testROBUST

Referenced files:

  • bin/OpenSim.ini.example — Template / example / test
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

HttpBodyMaxLenMAX int

Catalog value : 16384

Technical description (original English : Maximum bytes allowed for HTTP_BODY_MAXLENGTH. By default, llHTTPRequest limits the response body to 2048 bytes. This limit can be extended using HTTP_BODY_MAXLENGTH to a maximum of HttpBodyMaxLenMAX bytes.

Source code : OpenSim/Region/CoreModules/Scripting/HttpRequest/ScriptsHttpRequests.cs:124

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

https_listener bool

Catalog value : false

Technical description (original English : addicional HTTPS for "Out of band" management applications such as the remote admin module or scripts Create https_listener = "True" will create a listener on the port specified. Provide the path to your server certificate along with it's password

Source code : OpenSim/Framework/NetworkServersInfo.cs:72 | OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs:136 | OpenSim/Server/Base/HttpServerBase.cs:72

Shipped defaultsTemplate / example / testROBUST

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

https_main bool

Catalog value : false

Technical description (original English : HTTPS for "Out of band" management applications such as the remote admin module. May specify https_main = True to make the main http server use https or "False" to make the main server HTTP

Source code : OpenSim/Server/Base/HttpServerBase.cs:71

Template / example / testROBUST

Referenced files:

  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

https_port int

Catalog value : 0

Technical description (original English : Set our listener to this port

Source code : OpenSim/Framework/NetworkServersInfo.cs:78 | OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs:141 | OpenSim/Server/Base/HttpServerBase.cs:117

Shipped defaultsTemplate / example / testROBUST

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MaxRequestConcurrency

Catalog value : 30

Technical description (original English : OpenSim can send multiple simultaneous requests for services such as asset retrieval. However, some versions of mono appear to hang when there are too many simultaneous requests, default is 30 and is currently applied only to assets [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

OutboundDisallowForUserScripts string

Catalog value : 0.0.0.0/8|10.0.0.0/8|100.64.0.0/10|127.0.0.0/8|169.254.0.0/16|172.16.0.0/12|192.0.0.0/24|192.0.2.0/24|192.88.99.0/24|192.168.0.0/16|198.18.0.0/15|198.51.100.0/24|203.0.113.0/24|224.0.0.0/4|240.0.0.0/4|255.255.255.255/32

Technical description (original English : Disallow the following address ranges for user scripting calls (e.g. llHttpRequest()) This is based on http://en.wikipedia.org/wiki/Reserved_IP_addresses This stops users making HTTP calls to machines in the simulator's local network. If you need to allow some LAN calls we recommend you use OutboundDisallowForUserScriptsExcept documented in OpenSim.ini.example If you override OutboundDisallowForUserScripts directly you need to be very careful. Network ranges are specified in CIDR notation (http://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing#CIDR_notation) with multiple entries separated by | To specify an individual IP address use the /32 netmask (e.g. 192.168.1.3/32) You can also specify individual <addr>:<port> endpoints (e.g. 192.168.1.3:8003) If an address if given without a port number then port 80 is assumed.

Source code : OpenSim/Framework/OutboundUrlFilter.cs:83

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

OutboundDisallowForUserScriptsExcept string

Catalog value : code: "" / ini: 192.168.1.3:8003, 192.168.1.3:8003|myinternalserver:8000, 192.168.1.0/24, 192.168.1.2/32

Technical description (original English : By default, OpenSimulator does not allow scripts to make HTTP calls to addresses on the simulator's LAN. See the OutboundDisallowForUserScripts parameter in OpenSimDefaults.ini for more information on this filter. If you need to allow scripts to make some LAN calls use the OutboundDisallowForUserScriptsExcept parameter below. We recommend that you do not override OutboundDisallowForUserScripts directly unless you are very sure about what you're doing. this HTTP calls can also use ssl see opensimDefaults.ini You can whitelist individual endpoints by IP or FQDN, e.g.

Source code : OpenSim/Framework/OutboundUrlFilter.cs:85

Template / example / test

Referenced files:

  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

port int

Catalog value : code: 0, 9000 / ini: ${Const|PrivatePort}

Technical description (original English : Set by Dreamgrid

Source code : OpenSim/Server/Base/HttpServerBase.cs:63 | addon-modules/21Wifi/WebApp/WebApp.cs:410

Template / example / testROBUST

Referenced files:

  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test
  • bin/Robust.HG.ini — ROBUST
  • bin/Robust.HG.ini.proto — Template / example / test
  • bin/Robust.Tests.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

shard string

Catalog value : OpenSim

Technical description (original English : What is reported as the "X-Secondlife-Shard" Defaults to the user server url if not set The old default is "OpenSim", set here for compatibility

Source code : OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs:131 | OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:462

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

user_agent string

Catalog value : code: "" / ini: OpenSim LSL (Mozilla Compatible)

Technical description (original English : What is reported as the "User-Agent" when using llHTTPRequest Defaults to not sent if not set here. See the notes section in the wiki at http://wiki.secondlife.com/wiki/LlHTTPRequest for comments on adding " (Mozilla Compatible)" to the text where there are problems with a web server

Source code : OpenSim/Region/CoreModules/Scripting/LSLHttp/UrlModule.cs:132 | OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:463

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

XFFTrustedProxies string

Catalog value : code: "" / ini: 127.0.0.1|194.32.21.0/24|194.32.100.2|myproxy.org

Technical description (original English : If you have a transparent proxy or proxies, you need to configure them to process http header X-Forwarded-For in a secure way In order for OpenSim to trust them add their addresses (as seen by OpenSim) to this setting You can specify multiple addresses by separating them with a bar Each address can be a hostname (heavier), an IP address or a network range in CIDR format example

Source code : OpenSim/Framework/NetworkXffUtil.cs:57

Template / example / test

Referenced files:

  • bin/OpenSim.ini.example — Template / example / test
  • bin/Robust.HG.ini.example — Template / example / test
  • bin/Robust.ini.example — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.