OpenSimulator · EN

Browse INI sections

Dedicated section search, alphabetical index and detailed settings from the catalog.

This index only includes entries with an explicit INI-file reference in the catalog. Optional modules and example templates may still appear: always verify the source file before adding settings.

← Back to all sections

[ODEPhysicsSettings] (34 settings)

ODE physics settings: behavior varies by engine and version.

34 settings

av_density float

Catalog value : 80

Technical description (original English : used to calculate mass of avatar. float AVvolume = (float) (Math.PI*Math.Pow(CAPSULE_RADIUS, 2)*CAPSULE_LENGTH); av_density * AVvolume;

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:440

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

av_height_fudge_factor

Catalog value : 0.52

Technical description (original English : use this value to cut 52% of the height the sim gives us Currently unused [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

av_movement_divisor_run float

Catalog value : 0.8

Technical description (original English : speed of movement with Always Run on

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:442

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

av_movement_divisor_walk float

Catalog value : 1.3

Technical description (original English : speed of movement with Always Run off

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:441

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

avatar_terminal_velocity

Catalog value : 54

Technical description (original English : Terminal velocity of a falling avatar This is the same http://en.wikipedia.org/wiki/Terminal_velocity#Examples Max value is 255, min value is 0 [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

body_frames_auto_disable

Catalog value : 20

Technical description (original English : amount of ODE steps where object is non moving for ODE to automatically put it to sleep [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

collect_stats

Catalog value : false

Technical description (original English : If collect_stats is enabled, then extra stat information is collected which is accessible via the MonitorModule (see http://opensimulator.org/wiki/Monitoring_Module for more details). [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

filter_collisions

Catalog value : false

Technical description (original English : Filtering collisions helps keep things stable physics wise, but sometimes it can be overzealous. If you notice bouncing, chances are it's that. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

geom_updates_before_throttled_update

Catalog value : 15

Technical description (original English : send 1 update for every x updates below when throttled [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

geometry_default_density float

Catalog value : code: 10.0 / ini: 10.000006836

Technical description (original English : used in the mass calculation.

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:446

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

m_avatarobjectcontact_bounce

Catalog value : 0.1

Technical description (original English : Moving Avatar to object Contact [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

m_avatarobjectcontact_friction

Catalog value : 75.0

Technical description (original English : Moving Avatar to object Contact [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

m_terraincontact_bounce

Catalog value : 0.05

Technical description (original English : Moving Terrain Contact (avatar is moving) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

m_terrainContact_erp

Catalog value : 0.05025

Technical description (original English : Moving Terrain Contact (avatar is moving) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

m_terraincontact_friction

Catalog value : 75.0

Technical description (original English : Moving Terrain Contact (avatar is moving) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

maximum_mass_object float

Catalog value : 10000.01

Technical description (original English : Maximum mass an object can be before it is clamped

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:450

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

mesh_lod float

Catalog value : 32

Technical description (original English : number^2 non-physical level of detail of the sculpt texture. 32x32 - 1024 verticies

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEMeshWorker.cs:90

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

mesh_physical_lod float

Catalog value : code: 32 / ini: 16

Technical description (original English : number^2 physical level of detail of the sculpt texture. 16x16 - 256 verticies

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEMeshWorker.cs:92

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

mesh_sculpted_prim bool

Catalog value : true

Technical description (original English : Do we want to mesh sculpted prim to collide like they look?

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEMeshWorker.cs:89

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

MinSizeToMeshmerize

Catalog value : 0.1

Technical description (original English : collisions of small objects againts larger ones can have a increased CPU load cost so this are represented by a simple BOX if all their scale dimensions are lower or equal to this option. Default is 0.1m (ubOde only) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

nm_terraincontact_bounce

Catalog value : 0.1

Technical description (original English : Non Moving Terrain Contact (avatar isn't moving) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

nm_terraincontact_erp

Catalog value : 0.1025

Technical description (original English : Non Moving Terrain Contact (avatar isn't moving) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

nm_terraincontact_friction

Catalog value : 255.0

Technical description (original English : Non Moving Terrain Contact (avatar isn't moving) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

objectcontact_bounce

Catalog value : 0.2

Technical description (original English : Object to Object Contact and Non-Moving Avatar to object [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

objectcontact_friction

Catalog value : 250.0

Technical description (original English : Object to Object Contact and Non-Moving Avatar to object [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

physics_logging

Catalog value : true

Technical description (original English : default is false [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

physics_logging_append_existing_logfile

Catalog value : true

Technical description (original English : append to existing physics logfile, or overwrite existing logfiles? [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

physics_logging_interval

Catalog value : 50

Technical description (original English : every n simulation iterations, the physics snapshot file is updated [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

use_NINJA_physics_joints

Catalog value :

Technical description (original English : Use jointed (NINJA) physics?. Choices: true false. Depends on: [Startup]physics:OpenDynamicsEngine. Default: false. If you would like physics joints to be enabled through a special naming convention in the client, set this to true. (see NINJA Physics, http://opensimulator.org/wiki/NINJA_Physics) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Template / example / test

Referenced files:

  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

world_gravityx float

Catalog value : 0

Technical description (original English : Gravity. Feel like falling up? change world_gravityz to 9.8 instead of -9.8. m/s

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:432

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

world_gravityy float

Catalog value : 0

Technical description (original English : Gravity. Feel like falling up? change world_gravityz to 9.8 instead of -9.8. m/s

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:433

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

world_gravityz float

Catalog value : -9.8

Technical description (original English : Gravity. Feel like falling up? change world_gravityz to 9.8 instead of -9.8. m/s

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:434

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

world_solver_iterations

Catalog value : 10

Technical description (original English : number of iterations of constrains solver, higher should improve results up to a point where acumulated math errors eliminate the improvement more steps may increase CPU load. No real gain in changing [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]

Source code :

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

world_stepsize float

Catalog value : code: 0.020 / ini: 0.01818

Technical description (original English : World Step size. with legacy ODE this value needs to be close to 0.02s with ubOde this value can be reduced to improve simulation quality with the cost of higher cpu load you will need to test acording to you needs choosing a value that is a integer sub multiple of FrameRate reduces some jitter on reported physics FPS

Source code : OpenSim/Region/PhysicsModules/ubOde/ODEScene.cs:438

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.