OpenSimulator · EN

Browse INI sections

Dedicated section search, alphabetical index and detailed settings from the catalog.

This index only includes entries with an explicit INI-file reference in the catalog. Optional modules and example templates may still appear: always verify the source file before adding settings.

← Back to all sections

[RemoteAdmin] (14 settings)

The settings below are listed in the catalog. Availability depends on OpenSimulator version and installed modules.

14 settings

access_ip_addresses string

Catalog value : code: "" / ini: 0.0.0.0, 0.0.0.0 ...

Technical description (original English : List the IP addresses allowed to call RemoteAdmin If access_ip_addresses isn't set, then all IP addresses can access RemoteAdmin.

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:115

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

access_password string

Catalog value : ***

Technical description (original English : This password is required to make any XMLRPC call (should be set as the "password" parameter)

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:112 | OpenSim/Region/OptionalModules/Avatar/Chat/IRCBridgeModule.cs:88

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

bind_ip_address string

Catalog value : 0.0.0.0

Technical description (original English : Set this to the ip address that you want the admin server to bind to

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:130

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

copy_folders bool

Catalog value : false

Technical description (original English : update appearance copies inventory items and wearables of default avatars. if this value is false (default), just worn assets are copied to the Clothes folder; if true, all Clothes and Bodyparts subfolders are copied. the receiver will wear the same items the default avatar did wear.

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:2881

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

create_region_enable_voice bool

Catalog value : false

Technical description (original English : set this variable to true if you want the create_region XmlRpc call to unconditionally enable voice on all parcels for a newly created region [default: false]

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:731

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

create_region_public bool

Catalog value : code: true / ini: false

Technical description (original English : set this variable to false if you want the create_region XmlRpc call to create all regions as private per default (can be overridden in the XmlRpc call) [default: true]

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:732

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

default_appearance string

Catalog value : default_appearance.xml

Technical description (original English : path to default appearance XML file that specifies the look of the default avatars

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:3232

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

default_female string

Catalog value : code: Default Female, Default Default / ini: Default Female

Technical description (original English : specify the default appearance for an avatar created through the remote admin interface This will only take effect is the file specified by the default_appearance setting below exists

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:2794 | OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:2795

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

default_male string

Catalog value : Default Male

Technical description (original English : specify the default appearance for an avatar created through the remote admin interface This will only take effect is the file specified by the default_appearance setting below exists

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:2793

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

enabled bool

Catalog value : false

Technical description (original English : Enable the remote admin interface?. Choices: true false. Default: false.

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:104

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

enabled_methods string

Catalog value : all

Technical description (original English : enable only those methods you deem to be appropriate using a | delimited whitelist for example, enabled_methods = admin_broadcast|admin_region_query|admin_save_oar|admin_save_xml if this parameter is not specified but enabled = true, all methods will be available

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:182

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

port int

Catalog value : 0

Technical description (original English : Set this to a nonzero value to have remote admin use a different port

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:113

Shipped defaultsTemplate / example / test

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults
  • bin/OpenSim.ini.example — Template / example / test
  • bin/config-include/Proto/OsGrid/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Region/OpenSim.ini — Template / example / test
  • bin/config-include/Proto/Robust/OpenSim.ini — Template / example / test

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

region_file_template string

Catalog value : {0}x{1}-{2}.ini

Technical description (original English : the create_region XmlRpc call uses region_file_template to generate the file name of newly create regions (if they are created persistent). the parameter available are: {0} - X location {1} - Y location {2} - region UUID {3} - region port {4} - region name with " ", ":", "/" mapped to "_"

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:837

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.

region_limit int

Catalog value : 0

Technical description (original English : we can limit the number of regions that XmlRpcCreateRegion will allow by setting this to a positive, non-0 number: as long as the number of regions is below region_limits, XmlRpcCreateRegion will succeed. setting region_limit to 0 disables the check. default is 0

Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:730

Shipped defaults

Referenced files:

  • bin/OpenSimDefaults.ini — Shipped defaults

This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.