Browse INI sections
Dedicated section search, alphabetical index and detailed settings from the catalog.
[Startup] (106 settings)
Simulator startup and global options, including console, logging, modules and physics.
106 settings
allow_regionless bool
Catalog value : false
Technical description (original English : Allow the simulator to start up if there are no region configuration available from the selected region_info_source.
Source code : OpenSim/ApplicationPlugins/LoadRegions/RegionLoaderFileSystem.cs:58 | OpenSim/ApplicationPlugins/LoadRegions/RegionLoaderWebServer.cs:64
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
AllowHypergridMapSearch
Catalog value :
Technical description (original English : No documentation in INI comments. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
AllowMODFunctions
Catalog value :
Technical description (original English : Default: Allow JsonStore Module. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
AllowScriptCrossing bool
Catalog value : true
Technical description (original English : Allow scripts to keep running when they cross region boundaries, rather than being restarted. State is reloaded on the destination region. This only applies when crossing to a region running in a different simulator. For crossings where the regions are on the same simulator the script is always kept running.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1012
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
async_call_method string
Catalog value : code: "" / ini: SmartThreadPool
Technical description (original English : Sets the method that OpenSim will use to fire asynchronous events. Valid values are , QueueUserWorkItem, SmartThreadPool, and Thread.
Source code : OpenSim/Region/Application/OpenSim.cs:120
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
CacheSculptMaps bool
Catalog value : true
Technical description (original English : if you use Meshmerizer and want sculpt map collisions, setting this to to true will store decoded sculpt maps in a special folder in your bin folder, which can reduce startup times by reducing asset requests. Some versions of mono dont work well when reading the cache files, so set this to false if you have compatibility problems.
Source code : OpenSim/Region/PhysicsModules/Meshing/Meshmerizer/Meshmerizer.cs:103
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
CertFileName string
Catalog value : OpenSim
Technical description (original English : # Certificate options: Set the certificate file name. the output files extensions are CertFileName.p12 and CertFileName.pfx.
Source code : OpenSim/Region/Application/OpenSimBase.cs:354 | OpenSim/Region/Application/OpenSimBase.cs:357
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
CertHostIp string
Catalog value : 127.0.0.1
Technical description (original English : The certificate host IP (IP of this machine).
Source code : OpenSim/Region/Application/OpenSimBase.cs:359
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
CertHostName string
Catalog value : myRegionsExternalHostName
Technical description (original English : The certificate host name (domain or IP of this machine CN). Must be the same as "ExternalHostName" in Regions.ini
Source code : OpenSim/Region/Application/OpenSimBase.cs:358
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
CertPassword string
Catalog value : ***
Technical description (original English : Set the certificate password.
Source code : OpenSim/Region/Application/OpenSimBase.cs:360
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
CertRenewOnStartup bool
Catalog value : false
Technical description (original English : Renew the selfsigned certificate on every server startup ?
Source code : OpenSim/Region/Application/OpenSimBase.cs:354
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ClampPrimSize bool
Catalog value : false
Technical description (original English : If a viewer attempts to rez a prim larger than the non-physical or physical prim max, clamp the dimensions to the appropriate maximum This can be overridden in the region config file. [Section is chosen at runtime in code ({name}); INI files show [Startup].]
Source code : OpenSim/Framework/RegionInfo.cs:646 | OpenSim/Region/Framework/Scenes/Scene.cs:1004
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
clientstack_plugin string
Catalog value : OpenSim.Region.ClientStack.LindenUDP.dll
Technical description (original English : Set this to the DLL containing the client stack to use.
Source code : OpenSim/Region/Application/ConfigurationLoader.cs:342
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
collidable_prim bool
Catalog value : true
Technical description (original English : If true then prims can be collided with by avatars, other prims, etc. If false then all prims are phantom, no matter whether their phantom flag is checked or unchecked. Also, no prims are subject to physics.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:953
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ConfigDirectory string
Catalog value : .
Technical description (original English : Used by region module addins. You can set this to outside bin, so that addin configurations will survive updates. The OpenSim.exe process must have R/W access to the location.
Source code : OpenSim/Framework/Util.cs:2494 | OpenSim/Server/Base/ServicesServerBase.cs:133 | addon-modules/21Wifi/ServerConnectors/WifiServerConnector.cs:89
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / testbin/Robust.Tests.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
console string
Catalog value : "", local
Technical description (original English : Inferred from code: Sets console. string (stored in m_consoleType), read by OpenSim, ServicesServerBase.
Source code : OpenSim/Region/Application/OpenSim.cs:103 | OpenSim/Region/Application/OpenSim.cs:106 | OpenSim/Server/Base/ServicesServerBase.cs:156
Referenced files:
bin/Robust.Tests.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ConsoleHistoryFile string
Catalog value : OpenSimConsoleHistory.txt
Technical description (original English : The history file can be just a filename (relative to OpenSim's bin/ directory or it can be a full path to somewhere else. (default is OpenSimConsoleHistory.txt in bin/) [Section section inferred from INI files.]
Source code : OpenSim/Framework/Console/LocalConsole.cs:97
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / testbin/Robust.Tests.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ConsoleHistoryFileEnabled bool
Catalog value : code: false / ini: true
Technical description (original English : Console commands can be saved to a file, so the command history persists after a restart. (default is true) [Section section inferred from INI files.]
Source code : OpenSim/Framework/Console/LocalConsole.cs:90
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / testbin/Robust.Tests.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ConsoleHistoryFileLines int
Catalog value : 100
Technical description (original English : How many lines of command history should we keep? (default is 100) [Section section inferred from INI files.]
Source code : OpenSim/Framework/Console/LocalConsole.cs:98
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / testbin/Robust.Tests.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ConsoleHistoryTimeStamp bool
Catalog value : false
Technical description (original English : Time stamp commands in history file (default false) [Section section inferred from INI files.]
Source code : OpenSim/Framework/Console/LocalConsole.cs:100
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ConsolePrompt string
Catalog value : Region (\R)
Technical description (original English : Console prompt Certain special characters can be used to customize the prompt Currently, these are \R - substitute region name \\ - substtitue \
Source code : OpenSim/Region/Application/OpenSim.cs:127
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
crash_dir string
Catalog value : crashes
Technical description (original English : Directory to save crashes to if above is enabled (default is /opensimdir/crashes/*.txt or C:\opensim\crashes\*.txt)
Source code : OpenSim/Region/Application/Application.cs:340
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
DecodedSculptMapPath string
Catalog value : j2kDecodeCache
Technical description (original English : Path to decoded sculpty maps Defaults to "j2kDecodeCache
Source code : OpenSim/Region/PhysicsModules/Meshing/Meshmerizer/Meshmerizer.cs:102
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
DefaultDrawDistance float
Catalog value : code: 255 / ini: 255.0
Technical description (original English : the default view range. Viewers override this ( no major effect still )
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:922
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
DefaultScriptEngine string
Catalog value : YEngine
Technical description (original English : Default script engine. Choices: YEngine. Default script engine to use. Currently, we only have YEngine
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1018
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
DeleteOnUnregister
Catalog value :
Technical description (original English : RegionOnline is Set when a region comes online, unset when it unregisters and DeleteOnUnregister is false [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
economymodule string
Catalog value : ""
Technical description (original English : having both options true does provide encryption but with low security set both true if you don't care to use SSL, they are needed to contact regions or grids that do use it. Default: economy module.
Source code : OpenSim/Region/OptionalModules/World/MoneyModule/SampleMoneyModule.cs:264 | addon-modules/dtl-paypal/addon-modules/dtl-paypal/PayPalModule.cs:861
Referenced files:
bin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
emailmodule string
Catalog value : DefaultEmailModule
Technical description (original English : ## EMAIL MODULE The email module requires some configuration. It needs an SMTP server to send mail through.
Source code : OpenSim/Region/CoreModules/Scripting/EMailModules/EmailModule.cs:123
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
EnableCertConverter bool
Catalog value : false
Technical description (original English : Enabling this feature will automatically convert the CA .pem certificates to OpenSim compatible PKCS12 .p12 and .pfx certificates on every server startup. The resulting certificates are stored in the bin\SSL\ssl folder. Enable pem to pkcs12 certificates converter. Choices: true false. Default: false.
Source code : OpenSim/Region/Application/OpenSimBase.cs:365
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
enableflyslow bool
Catalog value : false
Technical description (original English : If enabled, enableFlySlow will change the primary fly state to FLYSLOW, and the "always run" state will be the regular fly.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:946
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
EnableRobustSelfsignedCertSupport bool
Catalog value : false
Technical description (original English : SSL selfsigned certificate settings. Enable selfsigned certificate creation for local and external use. When set to true, will create a folder SSL\ and 2 sub folders SSL\ssl\ and SSL\src\. Next creates and store an RSA private key in SSL\src\ and the derived selfsigned certificate in SSL\ssl\ folder. Is also possible to renew the certificate on every server restart if CertRenewOnStartup is set to true.
Source code : OpenSim/Server/Base/ServicesServerBase.cs:137
Referenced files:
bin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
EnableSelfsignedCertSupport bool
Catalog value : false
Technical description (original English : Enable selfsigned certificate creation for local and external use. When set to true, will create a folder SSL\ and 2 sub folders SSL\ssl\ and SSL\src\. Next creates and store an RSA private key in SSL\src\ and the derived selfsigned certificate in SSL\ssl\ folder. Is also possible to renew the certificate on every server restart if CertRenewOnStartup is set to true.
Source code : OpenSim/Region/Application/OpenSimBase.cs:352
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
FrameTime float
Catalog value : code: 0.0908 / ini: 0.0909
Technical description (original English : Main Frame time This defines the rate of several simulation events. Default value should meet most needs. It can be reduced to improve the simulation of moving objects, with possible increase of cpu and network loads. It should not be less than the physics engine step time. Being a integer multiple of it may reduce some jitter in reported physics FPS. changing this value, you need to change some of the following *EveryNFrames so their actions timing remains the same
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1089
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
FrameTimeCritPercent int
Catalog value : 40
Technical description (original English : The values below represent the percentage of the target frame time that, when underrun, should trigger yellow or red in the lag meter. Less than 60% of FPS is amber by default, less then 40% is red. These values are advisory. Viewers may choose to not use them but it is encouraged that they do.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1091
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
FrameTimeWarnPercent int
Catalog value : 60
Technical description (original English : The values below represent the percentage of the target frame time that, when underrun, should trigger yellow or red in the lag meter. Less than 60% of FPS is amber by default, less then 40% is red. These values are advisory. Viewers may choose to not use them but it is encouraged that they do.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1090
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
host string
Catalog value : localhost
Technical description (original English : Set here or use the -host command-line switch
Source code : OpenSim/ConsoleClient/ConsoleClient.cs:72
Referenced files:
bin/OpenSim.ConsoleClient.ini.example— Template / example / testbin/OpenSim.ConsoleClient.ini— Other file
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
HttpProxy string
Catalog value : http://proxy.com:8080
Technical description (original English : Http proxy setting for llHTTPRequest and dynamic texture loading, if required
Source code : OpenSim/Region/CoreModules/Scripting/HttpRequest/ScriptsHttpRequests.cs:108 | OpenSim/Region/CoreModules/Scripting/LoadImageURL/LoadImageURLModule.cs:113
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
HttpProxyExceptions string
Catalog value : .mydomain.com;localhost
Technical description (original English : If you're using HttpProxy, then you can set HttpProxyExceptions to a list of regular expressions for URLs that you don't want to go through the proxy. For example, servers inside your firewall. Separate patterns with a ';'
Source code : OpenSim/Region/CoreModules/Scripting/HttpRequest/ScriptsHttpRequests.cs:112 | OpenSim/Region/CoreModules/Scripting/LoadImageURL/LoadImageURLModule.cs:116
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
InworldRestartShutsDown bool
Catalog value : false
Technical description (original English : If you have only one region in an instance, or to avoid the many bugs that you can trigger in modules by restarting a region, set this to true to make the entire instance exit instead of restarting the region. This is meant to be used on systems where some external system like Monit will restart any instance that exits, thereby making the shutdown into a restart.
Source code : OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:286 | OpenSim/Region/CoreModules/World/Region/RestartModule.cs:76 | OpenSim/Region/Framework/Scenes/Scene.cs:1473
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
JobEngineEnabled bool
Catalog value : true
Technical description (original English : Allow certain jobs to be run consecutively in a job engine rather than always concurrently. This improves performance in regions with large numbers of connections (in the hundreds).
Source code : OpenSim/Region/Application/OpenSimBase.cs:347
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
LegacySitOffsets bool
Catalog value : true
Technical description (original English : use legacy math for sittarget offset "correction" set this option to false to use improved math more compatibility with SL. keep it true if you have many old objects with sits set by scripts. the offset in question is added to the SitTarget to find the sitting avatar position. acording to its size, etc.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:928
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
LinksetPrims int
Catalog value : 0
Technical description (original English : Maximum number of prims allowable in a linkset. Affects creating new linksets. Ignored if less than or equal to zero. This can be overridden in the region config file. [Section is chosen at runtime in code ({name}); INI files show [Startup].]
Source code : OpenSim/Framework/RegionInfo.cs:655 | OpenSim/Region/Framework/Scenes/Scene.cs:989
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
logfile string
Catalog value : code: null / ini: OpenSim.log
Technical description (original English : Log file location. This can be set to a simple file path
Source code : OpenSim/Framework/Servers/ServerBase.cs:181
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
LogOverloads bool
Catalog value : true
Technical description (original English : Force logging when the thread pool approaches an overload condition Provides useful data for post-mortem analysis even in a production system with reduced logging
Source code : OpenSim/Region/Application/OpenSimBase.cs:167
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
LogShowStatsSeconds int
Catalog value : ini: 3600 (code: m_periodDiagnosticTimerMS / 1000)
Technical description (original English : Simulator statistics are output to the console periodically at debug level INFO. Setting this to zero disables this output.
Source code : OpenSim/Framework/Servers/BaseOpenSimServer.cs:122
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ManagedStatsRemoteFetchURI string
Catalog value : code: "" / ini: ManagedStats
Technical description (original English : Simulator StatsManager URI Enable fetch of StatsManager registered stats. Fetch is query which can optionally specify category, container and stat to fetch. If not selected, returns all of that type. http://simulatorHTTPport/ManagedStats/?cat=Category&cont=Container&stat=Statistic
Source code : OpenSim/Region/Application/OpenSimBase.cs:236
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MaxDrawDistance float
Catalog value : code: 512.0 / ini: 512
Technical description (original English : limit the maximum view range ( no effect still (does limit MaxRegionsViewDistance) )
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:923
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MaximumTimeBeforePersistenceConsidered long
Catalog value : 600
Technical description (original English : Objects will always be considered for persistance in the next sweep if the first change occurred this number of seconds ago
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1015
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MaxPoolThreads int
Catalog value : code: 25 / ini: 300
Technical description (original English : Max threads to allocate on the FireAndForget thread pool when running with the SmartThreadPool option above
Source code : OpenSim/Region/Application/OpenSim.cs:126
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MaxPrimUndos int
Catalog value : 20
Technical description (original English : Maximum number of position, rotation and scale changes for each prim that the simulator will store for later undos Increasing this number will increase memory usage.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:950
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MaxRegionsViewDistance float
Catalog value : 255
Technical description (original English : Other regions visibility depends on avatar position and view range the view range considered is limited the maximum and minimum distances if you set MaxRegionsViewDistance to zero, other regions will not be seen, and crossing to them is disabled
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:924
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
meshing string
Catalog value : code: "" / ini: ubODEMeshmerizer, Meshmerizer, ZeroMesher
Technical description (original English : Select a mesher for physics here. This the code that defines the shapes the physics engines will use for collisons based on prims data
Source code : OpenSim/Region/Application/ConfigurationLoader.cs:339 | OpenSim/Region/PhysicsModules/BulletS/BSScene.cs:228 | OpenSim/Region/PhysicsModules/Meshing/Meshmerizer/Meshmerizer.cs:95 | OpenSim/Region/PhysicsModules/Meshing/ZeroMesher.cs:77 | OpenSim/Region/PhysicsModules/ubOde/ODEModule.cs:51 | OpenSim/Region/PhysicsModules/ubOdeMeshing/Meshmerizer.cs:96 | addon-modules/PhysX/PhysXModule.cs:89
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MinimumTimeBeforePersistenceConsidered long
Catalog value : 60
Technical description (original English : Persistence of changed objects happens during regular sweeps. The following control that behaviour to prevent frequently changing objects from heavily loading the region data store. If both of these values are set to zero then persistence of all changed objects will happen on every sweep. Objects will be considered for persistance in the next sweep when they have not changed for this number of seconds
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1013
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MinPoolThreads int
Catalog value : 2
Technical description (original English : Min threads to allocate on the FireAndForget thread pool when running with the SmartThreadPool option above
Source code : OpenSim/Region/Application/OpenSim.cs:125
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MinRegionsViewDistance float
Catalog value : 96
Technical description (original English : Other regions visibility depends on avatar position and view range the view range considered is limited the maximum and minimum distances if you set MaxRegionsViewDistance to zero, other regions will not be seen, and crossing to them is disabled
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:925
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
NonPhysicalPrimMax int | float
Catalog value : code: 0, 256 / ini: 256
Technical description (original English : Maximum size of non physical prims. Affects resizing of existing prims. This can be overridden in the region config file (as NonPhysicalPrimMax!). [Section is chosen at runtime in code ({name}); INI files show [Startup].]
Source code : OpenSim/Framework/RegionInfo.cs:637 | OpenSim/Region/Framework/Scenes/Scene.cs:964
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
NonPhysicalPrimMin float
Catalog value : code: 0, 0.001 / ini: 0.001
Technical description (original English : Minimum size for non-physical prims.This can be overridden in the region config file (as NonPhysicalPrimMin!). [Section is chosen at runtime in code ({name}); INI files show [Startup].]
Source code : OpenSim/Framework/RegionInfo.cs:634 | OpenSim/Region/Framework/Scenes/Scene.cs:955
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
Normalized55FPS bool
Catalog value : true
Technical description (original English : Use of normalized 55FPS statistics Opensim does not have a frame rate control like other simulators. Most parameters that control timing can be configurable region by region. To achieve closer compatibility with values expected by viewers, scripts and users some parameters are converted to a equivalent per frame value. Additionally, they are scaled to values they would have on a system running at a nominal 55 frames per second rate. The scale factor it 55 * FrameTime, corresponding to 5 with default configuration You can choose to show the true physics FPS to viewers by setting Normalized55FPS to false.
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1092
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
NoVerifyCertChain bool
Catalog value : code: true, false / ini: true
Technical description (original English : SSL certificate validation options you can allow selfsigned certificates or no official CA with next option set to true
Source code : OpenSim/Framework/Servers/BaseOpenSimServer.cs:116 | OpenSim/Server/ServerMain.cs:124
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
NoVerifyCertHostname bool
Catalog value : code: true, false / ini: true
Technical description (original English : you can also bypass the hostname or domain verification
Source code : OpenSim/Framework/Servers/BaseOpenSimServer.cs:117 | OpenSim/Server/ServerMain.cs:125
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
outputCertName string
Catalog value : letsencrypt
Technical description (original English : Set the name of the resulting .p12 and .pfx. Set the name of the resulting .p12 and .pfx. Default: "letsencrypt".
Source code : OpenSim/Region/Application/OpenSimBase.cs:368
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
outputCertPassword string
Catalog value :
Technical description (original English : Set the .p12 and .pfx password. Set the .p12 and .pfx password. Default: "".
Source code : OpenSim/Region/Application/OpenSimBase.cs:371
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
pass string
Catalog value : ***
Technical description (original English : Set here or use the -pass command-line switch Please be aware that this is not secure since the password is in the clear we recommend the use of -pass wherever possible
Source code : OpenSim/ConsoleClient/ConsoleClient.cs:74
Referenced files:
bin/OpenSim.ConsoleClient.ini.example— Template / example / testbin/OpenSim.ConsoleClient.ini— Other file
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
PemCertPrivateKey string
Catalog value :
Technical description (original English : Set the absolute path of the pem private key "privkey.pem". Set the path of the private key .pem. Default: "".
Source code : OpenSim/Region/Application/OpenSimBase.cs:370
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
PemCertPublicKey string
Catalog value :
Technical description (original English : Set the absolute path of the "fullchain.pem". If your CA don't provide this file, you can use the "cert.pem" instead. Set the path of the public key .pem. Default: "".
Source code : OpenSim/Region/Application/OpenSimBase.cs:369
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
physical_prim bool
Catalog value : true
Technical description (original English : If true then prims can be made subject to physics (gravity, pushing, etc.). If false then physics flag can be set but it is not honoured. However, prims are still solid for the purposes of collision direction
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:952
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
PhysicalPrimMax int | float
Catalog value : code: 0, 10 / ini: 64
Technical description (original English : Maximum size of physical prims. Affects resizing of existing prims. This can be overridden in the region config file. [Section is chosen at runtime in code ({name}); INI files show [Startup].]
Source code : OpenSim/Framework/RegionInfo.cs:643 | OpenSim/Region/Framework/Scenes/Scene.cs:980
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
PhysicalPrimMin float
Catalog value : code: 0, 0.01 / ini: 0.01
Technical description (original English : Minimum size where a prim can be physical. This can be overridden in the region config file. [Section is chosen at runtime in code ({name}); INI files show [Startup].]
Source code : OpenSim/Framework/RegionInfo.cs:640 | OpenSim/Region/Framework/Scenes/Scene.cs:972
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
physics string
Catalog value : code: "" / ini: BulletSim, modified_BulletX, basicphysics, POS, PhysX, ubODE
Technical description (original English : Select the physics simulation engine
Source code : OpenSim/Region/Application/ConfigurationLoader.cs:338 | OpenSim/Region/PhysicsModules/BasicPhysics/BasicPhysicsScene.cs:80 | OpenSim/Region/PhysicsModules/BulletS/BSScene.cs:225 | OpenSim/Region/PhysicsModules/POS/POSScene.cs:73 | OpenSim/Region/PhysicsModules/ubOde/ODEModule.cs:47 | addon-modules/PhysX/PhysXModule.cs:81
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
PIDFile string
Catalog value : code: "" / ini: /tmp/OpenSim.exe.pid, /tmp/Robust.exe.pid
Technical description (original English : Place to create a PID file
Source code : OpenSim/ConsoleClient/ConsoleClient.cs:85 | OpenSim/Region/Application/OpenSimBase.cs:223 | OpenSim/Server/Base/ServicesServerBase.cs:183
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / testbin/Robust.Tests.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
port int
Catalog value : 8003
Technical description (original English : Set here or use the -port command-line switch
Source code : OpenSim/ConsoleClient/ConsoleClient.cs:73
Referenced files:
bin/OpenSim.ConsoleClient.ini.example— Template / example / testbin/OpenSim.ConsoleClient.ini— Other file
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
region_info_source string
Catalog value : filesystem
Technical description (original English : Determine where OpenSimulator looks for the files which tell it which regions to server Defaults to "filesystem" if this setting isn't present
Source code : OpenSim/ApplicationPlugins/LoadRegions/LoadRegionsPlugin.cs:89
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
regionload_regionsdir string
Catalog value : code: Regions / ini: C:\somewhere\xmlfiles\
Technical description (original English : Determines where the region XML files are stored if you are loading these from the filesystem. Defaults to bin/Regions in your OpenSimulator installation directory
Source code : OpenSim/ApplicationPlugins/LoadRegions/RegionLoaderFileSystem.cs:57 | OpenSim/ApplicationPlugins/RemoteController/RemoteAdminPlugin.cs:814 | OpenSim/Region/Application/OpenSim.cs:756 | addon-modules/OpenSimBirds/Module/BirdsModule/FlockingModule.cs:109 | addon-modules/OpenSimTide/Module/TideModule/TideModule.cs:85
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
regionload_webserver_url string
Catalog value : code: "" / ini: http://example.com/regions.xml
Technical description (original English : Determines the page from which regions xml is retrieved if you are loading these from the web The XML here has the same format as it does on the filesystem (including the <Root> tag), except that everything is also enclosed in a <Regions> tag.
Source code : OpenSim/ApplicationPlugins/LoadRegions/RegionLoaderWebServer.cs:63
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
RegistryLocation string
Catalog value : code: "", . / ini: .
Technical description (original English : Plugin Registry Location Set path to directory for plugin registry. Information about the registered repositories and installed plugins will be stored here. The OpenSim.exe process must have R/W access to the location.
Source code : OpenSim/Region/Application/OpenSimBase.cs:174 | OpenSim/Server/ServerMain.cs:131
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / testbin/Robust.HG.ini— ROBUSTbin/Robust.HG.ini.proto— Template / example / testbin/Robust.Tests.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
RobustCertFileName string
Catalog value : Robust
Technical description (original English : Certificate options: Set the certificate file name. the output files extensions are CertFileName.p12 and RobustCertFileName.pfx. This must be different than CertFileName in OpenSim.ini
Source code : OpenSim/Server/Base/ServicesServerBase.cs:139 | OpenSim/Server/Base/ServicesServerBase.cs:142
Referenced files:
bin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
RobustCertHostIp string
Catalog value : 127.0.0.1
Technical description (original English : The certificate host IP.
Source code : OpenSim/Server/Base/ServicesServerBase.cs:144
Referenced files:
bin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
RobustCertHostName string
Catalog value : ${Const|BaseHostname}
Technical description (original English : The certificate host name (CN).
Source code : OpenSim/Server/Base/ServicesServerBase.cs:143
Referenced files:
bin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
RobustCertPassword string
Catalog value : ***
Technical description (original English : Set the certificate password.
Source code : OpenSim/Server/Base/ServicesServerBase.cs:145
Referenced files:
bin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
RobustCertRenewOnStartup bool
Catalog value : false
Technical description (original English : Renew the selfsigned certificate on every server startup ?
Source code : OpenSim/Server/Base/ServicesServerBase.cs:139
Referenced files:
bin/Robust.HG.ini.example— Template / example / testbin/Robust.ini.example— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
save_crashes bool
Catalog value : false
Technical description (original English : Set this to true if you want to log crashes to disk this can be useful when submitting bug reports. However, this will only log crashes within OpenSimulator that cause the entire program to exit It will not log crashes caused by virtual machine failures, which includes mono and ODE failures. You will need to capture these native stack traces by recording the session log itself.
Source code : OpenSim/Region/Application/Application.cs:337
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
see_into_region bool
Catalog value : true
Technical description (original English : Allow child agents to see into the region even if their root counterpart isn't allowed in here
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:948
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
shutdown_console_commands_file string
Catalog value : shutdown_commands.txt
Technical description (original English : Console commands run on shutdown
Source code : OpenSim/Region/Application/OpenSim.cs:101
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
SpawnPointRouting string
Catalog value : closest
Technical description (original English : SpawnPointRouting adjusts the landing for incoming avatars. "closest" will place the avatar at the SpawnPoint located in the closest available spot to the destination (typically map click/landmark). "random" will place the avatar on a randomly selected spawnpoint; "sequence" will place the avatar on the next sequential SpawnPoint
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:998
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
StartDisabled bool
Catalog value : false
Technical description (original English : Make OpenSim start all regions with logins disabled. They will need to be enabled from the console if this is set
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:920
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
startup_console_commands_file string
Catalog value : startup_commands.txt
Technical description (original English : Console commands run at startup
Source code : OpenSim/Region/Application/OpenSim.cs:100
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
Stats_URI string
Catalog value : code: "" / ini: jsonSimStats
Technical description (original English : Simulator Stats URI Enable JSON simulator data by setting a URI name (case sensitive) Returns regular sim stats (SimFPS, ...)
Source code : OpenSim/Region/Application/OpenSimBase.cs:227
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
StunServers string
Catalog value : code: "" / ini: stun.l.google.com:19302, stun.cloudflare.com:3478
Technical description (original English : comma separated list of stun servers (in host:port format), for webrtc support, possible other uses in future [Also looked up in: Const, GridInfo, SimulatorFeatures (later sections override earlier).]
Source code : OpenSim/Framework/GridInfo.cs:536
Referenced files:
bin/OpenSim.ini.example— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
TelehubAllowLandmark bool
Catalog value : false
Technical description (original English : TelehubAllowLandmark allows users with landmarks to override telehub routing and land at the landmark coordinates when set to true default is false
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:999
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
timer_Interval int
Catalog value : 1200
Technical description (original English : timer_Script time interval (default 20 min) The time is 60 per minute
Source code : OpenSim/Region/Application/OpenSim.cs:117
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
timer_Script string
Catalog value : code: disabled / ini: filename
Technical description (original English : Console commands run every 20 minutes
Source code : OpenSim/Region/Application/OpenSim.cs:114
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
TrustBinaries bool
Catalog value : ini: false (code: m_trustBinaries)
Technical description (original English : Allow compiled script binary code to cross region boundaries. If you set this to "true", any region that can teleport to you can inject ARBITRARY BINARY CODE into your system. Use at your own risk. YOU HAVE BEEN WARNED!!!
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1011
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateAgentsEveryNFrames int
Catalog value : 1
Technical description (original English : Send position/velocity, etc. updates to agents in the scene This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1100
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateCoarseLocationsEveryNFrames int
Catalog value : code: 5 / ini: 50
Technical description (original English : Send coarse location updates to viewers. In a classic viewer, this updates the minimap. This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1095
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateEntityMovementEveryNFrames int
Catalog value : 1
Technical description (original English : Apply pending forces from physics calculations to an entity. This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1096
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateEventsEveryNFrames int
Catalog value : 1
Technical description (original English : Send out the on frame event to modules and other listeners. This should probably never deviate from 1. This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1097
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateObjectsEveryNFrames int
Catalog value : 1
Technical description (original English : Send scheduled updates to objects in the scene This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1098
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdatePhysicsEveryNFrames int
Catalog value : 1
Technical description (original English : Physics simulation execution or syncronization, acording to engine. Should be 1 This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1099
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateStorageEveryNFrames int
Catalog value : 200
Technical description (original English : Persitently store any objects which meet the PRIM STORAGE criteria This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1094
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateTempCleaningEveryNSeconds int
Catalog value : 180
Technical description (original English : Clean up temp on rez objects. This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1102
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UpdateTerrainEveryNFrames int
Catalog value : code: 1000 / ini: 50
Technical description (original English : Send terrain updates to viewers This must be a whole number
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1101
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UseCSJ2K bool
Catalog value : true
Technical description (original English : Image decoding. Use CSJ2K for layer boundary decoding if true, OpenJPEG if false
Source code : OpenSim/Region/CoreModules/Agent/TextureSender/J2KDecoderModule.cs:89
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
user string
Catalog value : Test
Technical description (original English : Set here or use the -user command-line switch
Source code : OpenSim/ConsoleClient/ConsoleClient.cs:71
Referenced files:
bin/OpenSim.ConsoleClient.ini.example— Template / example / testbin/OpenSim.ConsoleClient.ini— Other file
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UseSeparatePhysicsThread
Catalog value :
Technical description (original English : Used by DreamGrid - do not change this [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UseTrashOnDelete bool
Catalog value : true
Technical description (original English : Use "Trash" folder for items deleted from the scene When set to True (the default) items deleted from the scene will be stored in the user's trash or lost and found folder. When set to False items will be removed from the scene permanently
Source code : OpenSim/Region/Framework/Scenes/Scene.cs:1010
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
WorldMapModule string
Catalog value : WorldMap
Technical description (original English : Inferred from code: Selects the world map module (DLL:Class or module name). string, read by HGWorldMapModule, WorldMapModule. [Also looked up in: Map (later sections override earlier).]
Source code : OpenSim/Region/CoreModules/World/WorldMap/HGWorldMapModule.cs:61 | OpenSim/Region/CoreModules/World/WorldMap/WorldMapModule.cs:149
Referenced files:
bin/config-include/GridHypergrid.ini— Included configurationbin/config-include/Proto/OsGrid/GridHypergrid.ini— Template / example / testbin/config-include/Proto/Region/GridHypergrid.ini— Template / example / testbin/config-include/Proto/Robust/GridHypergrid.ini— Template / example / testbin/config-include/StandaloneHypergrid.ini— Included configuration
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.