Browse INI sections
Dedicated section search, alphabetical index and detailed settings from the catalog.
[YEngine] (18 settings)
YEngine scripting engine configuration.
18 settings
AsyncLLCommandLoopms
Catalog value : 100
Technical description (original English : Rate to poll for asynchronous command replies (ms) [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
AsyncScriptLLTimeMs
Catalog value :
Technical description (original English : Depends on: Time limit for ll* calls in ms. Default: AsyncScriptLLTimeMs 100. Time limit for ll* calls in ms. If a script exceeds this time limit, it will be paused and resumed in the next time slice. This is a safety mechanism to prevent scripts from hanging the simulator. However, setting this value too low may cause scripts to run more slowly, while setting it too high may allow scripts to hang the simulator for longer periods of time. [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
AutomaticLinkPermission bool
Catalog value : false
Technical description (original English : Allow for llCreateLink and llBreakLink to work without asking for permission only enable this in a trusted environment otherwise you may be subject to hijacking
Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:437
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
DisableUndergroundMovement bool
Catalog value : true
Technical description (original English : Disable underground movement of prims (default true); set to false to allow script controlled underground positioning of prims
Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:446
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
Enabled bool
Catalog value : code: false / ini: true
Technical description (original English : implements non preemptive microthreading, so fixing problems like llSleep or long events handlers but those will suffer from timeslicing, so will be slower. warning: scripts state is lost on TP or cross to Xengine regions (cars stop, etc) ignore its extensions (subset of original XMRengine), those are still undefined.
Source code : OpenSim/Region/ScriptEngine/YEngine/XMREngine.cs:207
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MaintenanceInterval int
Catalog value : 10
Technical description (original English : Interval (s) between maintenance runs (0 = disable)
Source code : OpenSim/Region/ScriptEngine/YEngine/XMREngine.cs:264
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
MinTimerInterval float
Catalog value : code: 0.5 / ini: 0.1, 0.5
Technical description (original English : Minimum settable timer interval. Any timer setting less than this is rounded up to this minimum interval.
Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:436
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
NotecardLineReadCharsMax int
Catalog value : 255
Technical description (original English : Maximum length of notecard line read Increasing this to large values potentially opens up the system to malicious scripters
Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:438
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
NumThreadScriptWorkers int
Catalog value : 2
Technical description (original English : number of threads to execute scripts. Too many threads can have negative impact on other region operations if a region machine is not overload (ie has sleeping CPU cores), increasing this number may reduce events response latency
Source code : OpenSim/Region/ScriptEngine/YEngine/XMREngine.cs:212
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
Priority string
Catalog value : Normal
Technical description (original English : Priority of those threads (Lowest, BelowNormal, Normal, AboveNormal or Highest). Higher priorit can have negative impact on other region operations
Source code : OpenSim/Region/ScriptEngine/YEngine/XMREngine.cs:213
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaults
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ScriptDelayFactor float
Catalog value : 1.0
Technical description (original English : Sets the multiplier for the scripting delays
Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:435
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ScriptDistanceLimitFactor float
Catalog value : 1.0
Technical description (original English : The factor the 10 m distances limits are multiplied by
Source code : OpenSim/Region/ScriptEngine/Shared/Api/Implementation/LSL_Api.cs:431
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ScriptEnginesPath string
Catalog value : ScriptEngines
Technical description (original English : scripts states and cache parent folder location
Source code : OpenSim/Region/ScriptEngine/YEngine/XMREngine.cs:292
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ScriptHeapSize int
Catalog value : 1024
Technical description (original English : maximum heap memory a script can use in KB
Source code : OpenSim/Region/ScriptEngine/YEngine/XMREngine.cs:221
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
ScriptStackSize int
Catalog value : 2048
Technical description (original English : maximum stack a script can use in KB
Source code : OpenSim/Region/ScriptEngine/YEngine/XMREngine.cs:220
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
SensorMaxRange
Catalog value : 96.0
Technical description (original English : Sensor settings [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
SensorMaxResults
Catalog value : 16
Technical description (original English : Sensor settings [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/OpenSim.ini.example— Template / example / testbin/config-include/Proto/Region/OpenSim.ini— Template / example / testbin/config-include/Proto/Robust/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.
UseSourceHashCode
Catalog value : true
Technical description (original English : to reuse binary compare sources using a hash codes of them or full text [Appears only in INI files; no literal read found in C# (may be read via a dynamic key, by another program, or obsolete).]
Source code :
Referenced files:
bin/OpenSimDefaults.ini— Shipped defaultsbin/config-include/Proto/OsGrid/OpenSim.ini— Template / example / test
This is provenance, not active configuration. Edit only files loaded by your architecture. On a simulator check effective values with config show. .example files must be copied and customized before use.